Description 1 pc. mandrel bent 3.00″ 6061-T6 aluminum intake tube with super clean lines and a look that is guaranteed to impress! Designed to fit all EG, EK (with EG/DC2 sub frame), and DC2 chassis using Hasport mounts and either an RBC or RRC intake manifold. No modification to your vehicle and fits perfectly in the engine bay just in front of the transmission case, just to the side of the radiator, so you’re not pulling in hot air. On the duty-end of the pipe I offer a traditional 5.00″ tall conical air filter with a small molded velocity stack designed into the base/ flange from S&B Filters. Due to the bracket being welded specifically for the deck height differences between the K20 or K24… there is a few days delay in shipping. You will need to be responsible for drilling a 1/2″ hole in the tube for the AIT sensor grommet (included). I stopped doing this due to complaints that the hole I drilled was not in an ideal location. Air filter cleaning kits can be purchased directly from S&B Filters HERE. Photo Courtesy of phoenixyellowdx
